A lot of choose and buy the LED display customers might have so a misunderstanding: as long as bought screen, but actually the LED display in before the choose and buy, and install and use all need to advance to prepare for. Today is ERALED full-color LED display engineering installation part do the following first introduce.
In buying before the LED display, the first thing we should think of the screen pack in where, what to do with, and watch the distant, to maintain and so on these late how detailed information should be considered in advance, and tell you the choose and buy the LED display manufacturers, so that they will help you in your needs a corresponding solutions. Generally speaking, LED screens have the following kinds installation.
A simple framework structure, full-color LED display installation
1. Hang outfit also called wall hung: wall requirement is solid wall or suspension place has the mixes clay beam. Hollow bricks or simple lie between block are not such installation.
Installations will fittings (Angle iron) by expansion screws in wall body, measure and ensure that the same high fittings is in a horizontal line.
Will framework (equipped with power) hang on it, and that no deformation measurement diagonal framework. By tapping screws will framework and fittings made fixed.
And then install and connected with chuck magnet ready unit board, adjust the height of the whole screen that sucker the smoothness.
2. A pack (hoisting) : wall requirement is solid wall body, with the marble metope or suspension methods place has the mixes clay beam. Other specific requirements with stick a wall outfit.
A framework of a certain distance from wall, affected by gravity, considering the framework will tilt to the wall, so in the distance the position of the corresponding bottom frame to do support stands.
Other installation methods are the same as above.
Lifting: in the installation must have suitable for installation site, such as a bar above or lintel place. Screen body generally need to add back cover.
If the screen is above beam or lintel, at this time will be prepared by expansion screw with all the threads of the fixed good, the boom length by the site condition and calm, and to cover with the same color screen body flange and stainless steel pipe. If the screen is PengDing above the steel beam, right now the wire rope for lifting.
With perforated framework (equipped with power) hang on it, use screws or steel wire clip fixed, measuring diagonal guarantee framework without distortion.
And then install and connected with chuck magnet ready unit board.
3. A pack
Portable seat installs: refers to the drawing-room and processed separately. Placed on the ground, can move.
Fixed installation: refers to the drawing-room and ground or metope is connected the fixed gestell.
Note: whether mobile or stationary, before installation to ensure measurement with level feet drawing-room level.
2. The structure LED display installation
Ground support type: the installation apply to no fixed place of installation lease display, or will display installed on fixed cement platform
Pillar type
Housetop type
Sets pattern
Above four installation, no matter which kind of, screen body frame structure basic consistent, the only force strong point. Framework of the basic requirements are as follows:
Screen behind with at least 600 mm body of space as a maintenance access, every three to four cabinet to the height of do a layer of maintenance access, easy installation and maintenance.
On the lower maintenance access to welding between ladder.
Each layer maintenance access to do lighting.
Ensure that the structure of the front fixed 40 * 40 with the industry of interface in the same horizontal plane to keep.
The assembly between by pins positioning, by connecting piece and screw to tighten, ensure the box and between the smoothness.
Shenzhen ERALED Co., LTD, the customer service center was founded in November 2006, and be responsible for all the LED display pre-sale, sale and after-sale service. The customer service center a perfect service system, and by a strong and well trained, very skillful service team. Now our customer service center consists of ten several technology exquisite, the experienced technical support engineer composition, be responsible for global full-color LED display pre-sale, sale and after-sale service support work. The customer service center are constantly improve the service level and quality, the greatest degree of guarantee to provide strong material guarantee. To timely and efficient to meet the customers' needs, the company has set up a file in the domestic set Shanghai, shenyang, xian, shenzhen four maintenance office, to ensure that in the 24 hours of construction site arrived in time.