led display screen Manufacturer

Note that these points can slow down the LED display shortened life expectancy

 

Note that these points can slow down the LED display shortened life expectancy

LED display in our country is developing very rapidly. Now in some areas of the city you can see the shadow of the LED display. However, if the improper operation of the LED display or deep understanding of it may lead to shortened life LED electronic display. What are some factors that affect the life of the LED electronic display it? Huaibei small series large led screen for everyone to talk about it:
LED electronic display life factors affect a switch electronic led screen display Note:
1 switching sequence:
When the opening screen: first boot, the opening screen.
When off-screen: first off screen, after shutdown
(First turn off the computer does not display, the screen will cause high body appears bright, burning lamps, serious consequences.)
2, a switch led screen interval time is greater than five minutes.
3, the computer control software into the project before the opening screen is energized.
4, avoid all white screen state opening screen, this time because of the impact of the current system maximum.
5, to avoid out of control in the opening screen, the system at this time because of the impact of the current maximum.
A computer does not enter the control software program;
B computer is not powered;
C control part is not powered.
6. Ambient temperature is too high or heat is not good conditions, you should be careful not to open the screen for a long time.
7. When part of the body line of electronic display appears very bright, should pay attention to timely off-screen, in this state for too long opening screen.
8. Often display the power switch trip, should be checked in the screen body or replace the power switch.
9. Regular inspection at the firm conditions attached. If loosening, pay attention to timely adjust ,, re-strengthening or updating hanging pieces.
10. According to large-screen display screen body, the control section the environment, avoid insect bites, when necessary, place the anti-rat poison.
Factors that affect the LED electronic display Second, the control section changes, changes in Notes
1. Computer, control power line zero part, and the fire can not reverse, should be strictly according to the original location of the connector. If peripherals, After connecting, you should test whether the cabinet charged.
2. When the mobile computer and other control equipment, should first check the connection before power cord, control panel without loosening.
3. You can not tamper with the communication line, flat line coupling position, length.
4. After the move, such as short-circuits, trip, burning lines, smoke and other anomalies appear, the test should be repeated energized, should be asked to find
Effect LED electronic display life of three factors, software operation Caution
1 software backup: WIN2003, WINXP, applications, software installation program, database, etc., we recommend using the "one key to restore" software, easy to operate.
2 master installation methods, raw data recovery, backup.
3 master control parameter settings, modify the underlying data preset
4 skilled use of the program, operation and editing.
5 regularly check for viruses, delete extraneous data
6. Part-time staff, do not operate software system.

Tel:86-755-27592546 Email: sales@eraled.biz WhatsApp:86-189-389-501-10 / 86-189-389-501-58 Skype:ERALEDdisplay