led display screen Manufacturer

Details may want to pay close attention LED display maintenance had to pay attention to small details

 

Details may want to pay close attention LED display maintenance had to pay attention to small details

LED display in our country is developing very rapidly. Now in some areas of the city you can see the shadow of the LED display. However, if the improper operation of the LED screen or deep understanding of it may lead to shortened life LED electronic display. What are some factors that affect the life of the LED display it?

1 switching sequence: When the opening screen: first boot, the opening screen. When off-screen: first off screen, after shutdown
First turn off the computer does not display, the screen will cause high body appears bright, burning lamps, serious consequences.
2, a switch screen interval time is greater than five minutes.
3, the computer control software into the project before the opening screen is energized.
4, avoid all white screen state opening led screen, this time because of the impact of the current system maximum.
5, to avoid out of control in the opening screen, the system at this time because of the impact of the current maximum.

A computer does not enter the control software program; B computer is not powered; C control part is not powered.

6. Ambient temperature is too high or heat is not good conditions, you should be careful not to open the screen for a long time.
7. LED display line appears very bright part of the body, it should pay attention to timely off-screen, in this state for too long opening screen.
8. Often display the power switch trip, should be checked in the screen body or replace the power switch.
9. Regular inspection at the firm conditions attached. If loosening, pay attention to timely adjust ,, re-strengthening or updating hanging pieces.
10. According to large led screen body, the control section the environment, avoid insect bites, when necessary, place the anti-rat poison.

Factors that affect the LED electronic display Second, the control section changes, changes in Notes
1. Computer, control power line zero part, and the fire can not reverse, should be strictly according to the original location of the connector. If peripherals, After connecting, you should test whether the cabinet charged.
2. When the mobile computer and other control equipment, should first check the connection before power cord, control panel without loosening.
3. You can not tamper with the communication line, flat line coupling position, length.
4. After the move, such as short-circuits, trip, burning lines, smoke and other anomalies appear, the test should be repeated energized, should be asked to find

Three factors affect the life of the LED display, software operation Caution
1 software backup: WIN2003, WINXP, applications, software installation program, database, etc., we recommend using the "one key to restore" software, easy to operate.
2 master installation methods, raw data recovery, backup.
3 master control parameter settings, modify the underlying data preset
4 skilled use of the program, operation and editing.
5 regularly check for viruses, delete extraneous data

Tel:86-755-27592546 Email: sales@eraled.biz WhatsApp:86-189-389-501-10 / 86-189-389-501-58 Skype:ERALEDdisplay